Main > Main Forum
IPAC LED volts?
<< < (2/2)
Buddabing:

--- Quote from: chrisindfw on May 31, 2005, 05:07:14 pm ---So I can create the oscar LED driver board.

Plug the IPAC inputs (num,scroll,caps)

Power it with 5v from ipac.

and when the computer turns on the caps lock, the caps LED will light?


The good thing is that this project has educated me so much on electronics, woodworking, and overall electronics :)



--- End quote ---

I believe so.

Link to Oscar's LED controller circuit

Link to GameCab's board

chrisindfw:
Awesome... Thank you very much for all your help.
Tiger-Heli:

--- Quote from: chrisindfw on May 31, 2005, 05:07:14 pm ---So I can create the oscar LED driver board.

Plug the IPAC inputs (num,scroll,caps)

Power it with 5v from ipac.

and when the computer turns on the caps lock, the caps LED will light?


The good thing is that this project has educated me so much on electronics, woodworking, and overall electronics :)

--- End quote ---
Yes for the Caps LED.  If You are wanting to power a 5V lamp from it, it might work, but I would recommend powering the OSCAR or Gamecab board directly from the PC power supply  rather than from the I-PAC.

You might be able to do it the original way, but I would double-check the loads and current requirements of the lamp before I wired it up.
Navigation
Message Index
Previous page

Go to full version