Main > Main Forum
YES YOU CAN! - Can I use the existing speaker in my arcade cab with pc?
(1/2) > >>
Wyluli:
Hey all,
I'm almost finished with my mame cab and I'm about to start on the "sound system" part of it.
pointdablame:
Get the cheapest amplified PC speakers you can find, hack them apart, and hook up the cab's speaker to the amp.
SirPeale:
I bought a 1/8" DIN jack from Radio Shack  and soldered wires to it.  These wires I then attached to the speaker in my cab.  Works quite well.  I've done it with three cabs now.
spriggy:

--- Quote from: pointdablame on May 30, 2005, 09:18:01 pm ---Get the cheapest amplified PC speakers you can find, hack them apart, and hook up the cab's speaker to the amp.

--- End quote ---

..further to this...you should find a small step-down transformer in one of the speaker casings which converts your 110v(or 220v or 240v depending where you are in the world) from the wall down to usually around 5v-12v for cheapies (8v was my last set of cheapies.
krick:
Check out these threads.  They should give you some ideas...

http://forum.arcadecontrols.com/index.php/topic,16381.0.html

http://forum.arcadecontrols.com/index.php/topic,20839.0.html

http://forum.arcadecontrols.com/index.php/topic,20398.0.html
Navigation
Message Index
Next page

Go to full version