| Main > Main Forum |
| Newbie CP design... |
| << < (3/8) > >> |
| markrvp:
--- Quote from: Sinner on May 31, 2005, 04:00:36 pm --- --- Quote from: markrvp on May 31, 2005, 03:50:17 pm ---That's something NoOne=NBA mapped for IntruderAlert (and me). --- End quote --- --- End quote --- |
| Bursk:
--- Quote --- --- End quote --- Here's another update...I took off 2" from the top, so the thing is now 48"x18"...I also moved things around a little, since my measurments were off (like I said before, I'm new to Illustrator)... --- Quote --- --- End quote --- What are the distances from the bottom of the CP to the bottom of the TB, and from the bottom of the CP to the bottom of the lower row of buttons, now that you've changed things around? |
| paigeoliver:
I have been a game player forever, and you can't put the trackball close ENOUGH to the front of the panel. You are only going to smack your hand on the FRONT of the machine if you utilize some really violent method of playing Capcom Bowling and Golden Tee Golf. Even most power golf game players start a drive with their fingertips on the trackball itself. Playing where you rare back and then impact the ball is needlessly overdoing it, will tear up the trackball and cabinet, and doesn't drive any further anyway. ;D ;D ;D 8) 8) 8) Forget a Happ super for a Q*Bert stick. Best stick for QBert on a wood panel (that can be had from happs) is a Universal in 4-way mode. It will have the added bonus of not requiring you drill holes at a 45 degree angle, since it just installs in a hole. :D :D :D :police: :police: :police: Also, your player 3 and 4 joysticks are installed incorrectly in every picture. They DO NOT GET ANGLED. Up should be the exact same direction on all 4 joysticks. Every original 4-player game ever made has up as the same direction on all 4-joysticks. Unfortunately a lot of BYOAC people have incorrectly installed them, and then defended it later, resulting in more people making that mistake. You can trust every 4-player arcade game ever made, or you can trust a small minority of weekend cabinet builders, it is up to you. :police: :police: Also, related to the player 3 and 4 joys being angled. What is the point of installing a special joystick at a 45 degree angle to play qbert when you already have 2 other joysticks installed at 45 degree angles??????????? ::) ::) ::) ::) ::) |
| Tiger-Heli:
--- Quote from: markrvp on May 31, 2005, 03:50:17 pm ---That's something NoOne=NBA mapped for IntruderAlert (and me). Basicall player 1 would use joysticks 3 & 1, and player 2 would use joysticks 2 & 4. Both would approach the control panel from 45 degrees. --- End quote --- Actually, here is the thread that showed that - I thought it was pretty ingenious - http://forum.arcadecontrols.com/index.php/topic,36565.msg328723.html#msg328723 But it was also a thread started by Sinner, FWIW. |
| Sinner:
--- Quote --- What are the distances from the bottom of the CP to the bottom of the TB, and from the bottom of the CP to the bottom of the lower row of buttons, now that you've changed things around? --- End quote --- 5.5" to the bottom of the bottom row of buttons... 4" to the bottom of the TB... |
| Navigation |
| Message Index |
| Next page |
| Previous page |