Main > Main Forum
Anyone got a Super or Sanwa stick? Need dimentions please.
markrvp:
Franco:
Here is a 300dpi scan of the Ultimarc J-Stik washer. It says Sanwa on it, and it is my understanding that these are Sanwa sticks.
You can measure it in Photoshop or print it out and measure the print.
I haven't found my caliper yet, so I can't measure the shaft until I find it.
Grasshopper:
Franco, I notice from your other thread that you used T-Stik's for your cab. The plastic sleeves and dust washers of the Happ Super and the T-Stik are exactly the same size. This is not surprising as the two joysticks are made by the same manufacturer (www.industrias-lorenzo.com). On IL's old website the sleeves and washers even had the same part numbers on the exploded diagrams.
Kremmit:
--- Quote from: markrvp on May 27, 2005, 05:31:57 pm ---Franco:
Here is a 300dpi scan of the Ultimarc J-Stik washer. It says Sanwa on it, and it is my understanding that these are Sanwa sticks.
You can measure it in Photoshop or print it out and measure the print.
I haven't found my caliper yet, so I can't measure the shaft until I find it.
--- End quote ---
You cannot trust somebody else's printer to print a pic exactly the same size as it comes out on your printer. Nor can you trust a different piece of software to print the same size on the same printer. Nor can you trust a different user to click exactly the same options on the same software on the same printer. Or your scanner to scan exactly to actual size.
I'd be leery of working from that without at least one known dimension to check your print size against.
--- Quote --- Posted by: Franco Posted on: May 26, 2005, 02:16:48 PM
Thats a good point. If you can give me the diameter of the plastic sleeve or the diameter of the hole in the plastic washer that would be great.
--- End quote ---
Leave some slack if you go from the sleeve. If the washer's too tight, it'll bind and stick to the sleeve, and ride up. When you use a plastic one that's too tight, no problem, you just drill it out. With stainless, not so easy.