| Main > Main Forum |
| Anyone got a Super or Sanwa stick? Need dimentions please. |
| (1/2) > >> |
| Franco:
Im making some more stainless dust washers for a couple of people tomorrow. Has anyone got a Happs Super and/or a Sanwa stick that you could measure and post the shaft diameters? The diameter I am after is the one shown on the pic at the bottom of the post. If anyone else wants any washers let me know before tomorrow and I will be able to get them sent off tomorrow afternoon. I can also make some next week but it just means you will recive them later. They are $10 per pair. Shipping to the USA from the UK is $4 for one pair or $5 for two. If you have a stick apart from a Wico can you please send me the shaft diameter or the diameter of the hole in your current washer. Thanks. |
| whammoed:
I can get measurement tonight (super) if no-one responds sooner. Do you want the diameter of the metal shaft or the plastic sleeve? On a super the dust washer goes around the plastic sleeve. |
| Franco:
Thanks mate. Thats a good point. If you can give me the diameter of the plastic sleeve or the diameter of the hole in the plastic washer that would be great. |
| NIVO:
I can tell you the diameter of the shaft of a super is 10mm. :) |
| ShinAce:
The dust washer measures: 2 1/8" total (or 54 mm) 5/8" inside diameter (or 16mm) My measurements were in inches, then converted to mm. Also, the circumference of the washer is tapered. |
| Navigation |
| Message Index |
| Next page |