| Main > Main Forum |
| mamemarquees CPO question |
| (1/2) > >> |
| Veinman:
I've done some searching and not found this specific answer regarding the polycarbonate coated control panel overlays from mamemarquees.com. Just how thick are they? I have a 5/8" panel to which I am adding a 1/8" sheet of lexan. Under the lexan I want the control panel overlay, and I'm curious how thick the whole thing will be when that is done. |
| NinjaEpisode:
Thickness, at the most is between 1/16 and 1/32 of an inch. It's really like a very THICK high quality poster. I didn't put lexan over mine simply because I was satisfied with the quality of the coating and felt it wasn't necessary. The lip around the edge made by the t-molding is noticeable, but certainly not a neusance and not something that's going to come loose or cause a problem. |
| gw71mgb:
I e-mailed Scott at Mame Marquees that very question a few weeks ago: "Pretty thin, around 11mils which is roughly 1/75th of an inch." 11 mils is .011" thick. -gary |
| monkeybomb:
It's not intended to be used under lexan. The colors are not that bright and not nearly as good as the colors for their sideart. I bought a set from them and never used the cpo because the color was so dull. I have heard he will print it differently if it is intended to be under lexan AND I have heard that it looks great. Be sure you talk to scott about it. ********IMPORTANT EDIT************** It appears I got in under the old system and his CPO's are different now. Check out the offer two posts down!!! I should also restate how unbelievable my side art looks. *********************************** oh yeah ******(TM) held by Koolmocraig |
| Veinman:
Interesting. I guess it's a good thing I will be cutting my lexan prior to ordering then. That way if I end up ruining my Lexan I can get the standard CPO, otherwise I'll get the brighter material. He really needs to beef up his FAQ. ;D |
| Navigation |
| Message Index |
| Next page |