| Main > Main Forum |
| Relay question (adding relay to Oscars LED driver board) - it works! |
| << < (4/10) > >> |
| RandyT:
Scan the diagram for the relay. I can't find it online. RandyT |
| JoyMonkey:
Good idea. Here's the relay's diagram... |
| RandyT:
That's a good start. Now, are there any labels on the relay at all ? If so, post what pin does what. RandyT |
| SirPoonga:
yeah, if oyu can get t he marking of the relay that would help. With my assumption on how relays work.. You send the required voltage through the coil, it creates a magnetic force which "flips the switch" for the NO circuit. So if I read that pic correctly it can take up to 125V to flip the switch for a 5v rated switch? or do I have that backwards? Err, got it backwards, just read the specs on RS's site. |
| JoyMonkey:
--- Quote from: RandyT on June 14, 2005, 04:31:41 pm ---That's a good start. Now, are there any labels on the relay at all ? If so, post what pin does what. RandyT --- End quote --- Unfortunately, there are no markings on the relay itself. Here's the photo from the RS website (don't think it's very helpful though). I looked all over for markings and found nothing. |
| Navigation |
| Message Index |
| Next page |
| Previous page |