Main > Main Forum

LED-Wiz USB LED and Output Control Device now available. *Blinky lights*

Pages: << < (15/92) > >>

SirPoonga:

based formt he picture, the LEDWiz is going to be USB? 

RandyT:


--- Quote from: SirPoonga on September 22, 2005, 12:15:04 pm ---based formt he picture, the LEDWiz is going to be USB? 

--- End quote ---

Yes.  That means that this version will be for Windows only until someone decides to try to make a Linux driver. 

I'll consider a DOS version down the road, but seeing as the functionality of the device is so software dependant, it would probably only be a shadow of this one.

Randy

Tommy Boy:

SirP, look at brandon's post again.  He's right.  It's 8 LED's on 3 inputs: 2H, 2V, 4D.  4W=2H+2V; 8W=2H+2V+4D.

Tiger-Heli:


--- Quote from: SirPoonga on September 22, 2005, 11:52:17 am ---Actually, it you wire it right you will only have 8 LEDs indicating directions available.
You'd need one output for 2way horizontal, 1 for 2 way vertical, 1 for 4way, 1 for 4way diagonals, 1 for 8way.  Then you'd wire those outputs to the appropiate LEDS.  It'd be like if you used more than one button for a single input on a keyboard encoder.

--- End quote ---
Except Kangaroo - Don't remember if it's 3 or 5 - way, there isn't a down, though.  And controls.ini has it wrong also, AFAICT.

SirPoonga:


--- Quote from: Tommy Boy on September 22, 2005, 12:31:37 pm ---SirP, look at brandon's post again.  He's right.  It's 8 LED's on 3 inputs: 2H, 2V, 4D.  4W=2H+2V; 8W=2H+2V+4D.

--- End quote ---
How can you do diagonal and regular 4 way with one input?

Wait, I get it.  You just turn on the colored wires that are running down for the appropiate directional.  Duh.  Basically I diagramed how it is to work with only 3 inputs :)  My little chart running down the side indicates which inputs to power.

Pages: << < (15/92) > >>

Go to full version