Main > Main Forum
LED-Wiz USB LED and Output Control Device now available. *Blinky lights*
MYX:
Randy,
With the somewhat official release of PowerMAME will you be doing a multi unit interface for the LEDWiz?
Circo:
--- Quote from: mahuti on January 24, 2006, 02:02:22 pm ---The little app I wrote can work with any other emulator.
For example; nintendo (which always uses the same buttons)
1. create a LWA for nintendo
2. Add nintendo=nintendo.lwa to the ini file.
3. launch the nes emulator with a batch file that calls my app like so; bloodywiz.exe nintendo
--- End quote ---
Do you have this up for download somewhere, I wanted to light the controls for the console systems in mamewah and an app like this would be perfect.
Circo:
Whoops I found it, when I did a search for bloodywiz.exe it showed right up. Thanks!
mahuti:
if you have any problems with it, let me know. I don't know if the last version I put up was bugfixed or not. Since noone complained, I left well enough alone.
Circo:
Ok I have my CAB lighting Perfect...Almost
OK here is where I am at
I am using powermame and bloodywiz to get everything working.
I am using bloodywiz to run the attract lighting in mamewah and light the correct buttons for every emulator except for mame. It works perfectly, as soon as I load up an SNES game for instance the attract lighting stops and the 6 SNES buttons light up for P1 and P2. As soon as I exit the game mamewah calls on bloodywiz to run attract lighting and it starts back up. Perfect!
The problem starts when I load up powermame the last command that bloodywiz keeps on repeating. Powermame will light up the controls and the attract mode will start back up.
Here is what i tried:
I made a blank.lwa that turned off all of the buttons, it works but as soon as powermame lights up the controls they blanked out again.
I tried a commandline app to clear the clipboard, no luck.
Any ideas on how to stop the commands from repeating?