Main > Main Forum
Connectors for swappable CP's
ChadTower:
Sounds to me like a major design flaw, to not have a way to do this easily.
Avery:
--- Quote from: ChadTower on May 19, 2005, 03:04:43 pm ---Sounds to me like a major design flaw, to not have a way to do this easily.
--- End quote ---
He has a way to do this easily - connectors that he can undo with one hand. ;)
If he didn't, well, yeah, it would be a problem.
NoOne=NBA=:
--- Quote from: ChadTower on May 19, 2005, 03:04:43 pm ---Sounds to me like a major design flaw, to not have a way to do this easily.
--- End quote ---
Yes, it was.
That's why I FIXED it.
Setabs:
I would definately recommend against balance the cp on the cabinet. I just get images of it falling to the ground. I would think you would mount the connection in the front or back under the cp and just tilt the panel forward or backward to disconnect and reconnect it. The docking station i could see working. It could also be a pain trying to set a 28" x 12" peice of wood with controls on it into the correct spot with percision.
NoOne=NBA=:
Thus my warnings.
Been there--Done that--Didn't like it.