Main > Main Forum
Do you glue when you screw..?
Veinman:
Well, since I'm using 3/4" MDF and 2" coarse thread screws, I think I'll unscrew some pieces and add some wood glue before it's too late. (I haven't filled any countersink holes yet.)
If I wasn't planning to fill those holes and effectively make it impossible to tighten the screws, I probably wouldn't even consider it.
lcddream:
noone has mentioned using dowels with glue...
NoOne=NBA=:
--- Quote from: lcddream on May 19, 2005, 09:44:55 pm ---noone has mentioned using dowels with glue...
--- End quote ---
I have?
Doweling is a pain.
I'd much rather just screw through, and coverup afterward--unless I am staining.
Then I'll take the time to do everything hidden.
Even then, I would probably screw from the inside, rather than dowel.
Dagg:
I did dowels and glue on the CP box only. The cabinet I framed with 2 by 4's but many folks go the bracket route.
tivogre:
Anywhere you need gap fillling with a glue joint, epoxy is the way to go.
It's no more messy than gorilla glue.