| Main > Main Forum |
| Sanwa harness pinout |
| (1/2) > >> |
| Goz:
I'm about to wire a couple of SANWA joys and was curious if anyone could tell me what the pinout is for the PC board on the joy. There are 5 pins so it makes sense that one pin is ground and the remaining 4 are up, down, left, and right but there are just enough possible combo's to make me want to have a beer and once that happens this panel will not get wired. Since i dont have the original harness it wont help to use color as a referrence. Thanks, -Goz |
| paigeoliver:
Ground will almost certainly be the far left, or far right pin. Should take about 20 seconds to figure out with a multimeter (or you can just look at the traces), sorry I can't be more helpful, but I am at work right now and don't have access to my candy cab at the moment. |
| Goz:
Paige, Thanks and I figured ground would be either position. I was hoping to get the full pin orientation from someone however as I'd like to the make the harness without needing to try each wire individually prior. If I could make the harness while I'm at work (when I have more spare time) as opposed to running through each wire with the wife insesently nagging in the background things would go far more smoothly. ;D Thanks, -Goz |
| RayB:
There's a more detailed thread about this somewhere... couple weeks old... |
| Goz:
Of course you know I did use the search feature ;D |
| Navigation |
| Message Index |
| Next page |