| Main > Main Forum |
| i-pac and Opti pac problems |
| (1/2) > >> |
| photorock:
I've had this problem before and i'm totally lost with it. I have the I-pac2 and opti pac which both work fine seperately but as soon as both are plugged in, popup menues appear everywhere the curser moves. I've tried everything i can think off (except on a different comp), i'm lost. Running WinXP SP1 on an A-Open (AX45-V) mobo, 2.4 GH with 512MB Ram. Any suggestions. |
| photorock:
I hate to say it... I GIVE UP! lol. This has been ongoing for 10 months, and all i've got is a $450 ornament that sits in the corner of the room. I'm surprised that I am the only one who has had a problem like this, which tells me the problem is on my end. I'm stumpted, but I think I may have a solution... a 20lb sledgehammer. LOL Just Frustrated. |
| JODY:
Windows menus appear? You're using a trackball to move the cursor? Not pressing any buttons? |
| markrvp:
What program is loaded when you see the problem? I have a similar problem that I have narrowed down to the Ultrastyle Frontend. If not, that sounds like a Windows problem or perhaps the HID information sent by the I-pac & Optipac are conflicting? To troubleshoot, I would try both on a different computer. If that works, then I would try a different OS on your cab (98SE maybe). I don't know, I'm making a WAG. |
| loungn14:
funny....I am having the exact same problem when in usb mode.. Can't get the thing working at all in serial mode... I was actually thinking of just spending the 42 bucks and getting the usb/ps2 converter for happ trackballs that replaces the boards and works with existing trackball... http://www.happcontrols.com/trackballs/56011300k.htm has anyone used this? |
| Navigation |
| Message Index |
| Next page |