Arcade Collecting > Restorations & repair

Crackington Centipede Restoration Project

<< < (6/11) > >>

rchadd:
here is a photo of the bezel

here are the measurements. sorry dont have anything to measure the angles. if you want amy other measurements please let me know.

note that you need to score the card either on the front or the back in certain places in order for it to fold correctly to give required shape. pay attention to photo above for idea on how it should look.

A=56.5cm
B=54cm
C=19cm
D=49.5cm
E=16.5cm
F=16.5cm
G=4.5cm
H=56cm
i=54cm
J=16.5cm
K=49.5cm
L=19cm
M=19cm
N=12cm
P=14.3cm
Q=8cm
R=14.3cm

tbombaci:
Thank you very much!

-Tom

tbombaci:
Could you measure the length on the inside corners? (the edge that is against the tube)

I guess it would be from the bottom of "L" to the bottom of "J", etc...  With this measurement, I can get the correct angle. Also, I am assuming the lip is 2.75cm with the exception of the long lip that  is 4.5cm.

Thanks again for all your help. For some reason, I just can't bring myself to buy the Arcadeshop repro!!

-Tom

rchadd:

--- Quote from: tbombaci on July 04, 2005, 12:25:23 am ---Could you measure the length on the inside corners? (the edge that is against the tube)

I guess it would be from the bottom of "L" to the bottom of "J", etc...
--- End quote ---

rchadd:
fitted control panel and coin door

Navigation

[0] Message Index

[#] Next page

[*] Previous page