| Main > Main Forum |
| Wiring up Joystick??? |
| (1/2) > >> |
| Marky_1979:
Iv wired up my happs joysticks no problem but iv recently bought som e sanwa ones and not sure how to do this as i cant even see the cherry switches or the bits you connect the wires to. Can anyone help?? |
| JoyMonkey:
I've never wired one, but I believe you use the 5 pins that protrude from the side. They should be something like: - Common (ground) - Up - Down - Left - Right Edit: Here's a standard wiring harness. |
| dave 1945:
5 pin joystick cable http://www.himuragames.com/store_joyacc.php is what you need i dont know what each wire does maybe someone round here knows that. |
| Marky_1979:
Yes thanks guys i had seem that wire but wasnt to sure if it could be used for emulation projects. I f anyone knows what each wire does would apreciate that alot. |
| RayB:
The first pin is probably ground. Then the others are directions. You can just hook em up and try out the directions to see which you've mixed up. |
| Navigation |
| Message Index |
| Next page |