Author Topic: Wiring Rotary Joystick to Optipac. (Read 725 times)

Fat_Trucker · « **on:** May 09, 2005, 02:44:05 pm »

Hi Guys,

I'm going to purchase a rotary stick from Happs and wondered if there are any problems/issues with wiring it to an Opti-Pac?.

Looking at the pics on the Happs site it looks like it has a proprietary connector for the rotary interface and I wasn't sure if this needed to be hacked to connect to the O-Pac or how easy this is to do?.

Thanks.

Magnet_Eye · « **Reply #1 on:** May 09, 2005, 06:16:31 pm »

I have the Happ's Rotary Optical sticks, and they are easy to connect to an opti-pac. 4 wires.

work fine.

If you get the 12 position rotary, that's another story.

Veinman · « **Reply #2 on:** May 09, 2005, 07:31:21 pm »

Yes, you can only use the optical with the O-PAC. For mechanicals you need Druin's interface board that can be found in the buy/sell/trade forum.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Wiring Rotary Joystick to Optipac. (Read 725 times)

Fat_Trucker

Wiring Rotary Joystick to Optipac.

Magnet_Eye

Re: Wiring Rotary Joystick to Optipac.

Veinman

Re: Wiring Rotary Joystick to Optipac.