| Main > Main Forum |
| Coin door (noob question) |
| (1/3) > >> |
| schleppie:
Hello- New to the forums (please be gentle)....I need a coin door for my cab but have tight vertical clearances. Therefore, instead of an over/under I'm thinking of using a black defender style coin door like: http://www.ysib.com/zoom/coindoor.html It seems that neither Wico, Happs, Bob Roberts, or CoinopExpress sell these. I know that Happs sells a pinball one that's similar, but I don't want any sort of port for a bill validator, nor a separate door for the coin box (to keep the size down). Anyone know where I can get one of these new, or am I just a moron and not looking in the right place on the aforementioned sites? Thanks! |
| cholin:
I think one of these was going on ebay with flames painted on it a while ago, could be wrong though, but still, search ebay. |
| schleppie:
Yeah, I've been looking on ebay for quite a while, but haven't seen this style new/NOS very often. There are plenty of Bally/Midway older style doors on ebay of similar size (i.e., with the metal coin reject buttons on them), but I was looking for the particular style that I linked to above. Any vendors that I'm not aware of that carry this? |
| Joystick Jerk:
You mentioned you didn't need a coinbox, but do you need any working coin mechs? If not, Happ makes a spiffy fake coin door in the size your looking for: http://www.happcontrols.com/pc/accessories/40071300.htm |
| NoOne=NBA=:
Happ has Over/Under mini-doors, like THIS. They aren't going to take up much, if ANY, more interior room than a Defender door with a cashbox will. The door will be a little taller on the outside though. Other than that, you're pretty much stuck with ebay, as far as I know. |
| Navigation |
| Message Index |
| Next page |