| Main > Main Forum |
| Rotary adapter for Happ/Midway 49-way Joystick |
| << < (3/25) > >> |
| screaming:
HOLY CRAPOLA! All I have to ask is WHEN?! :o :o --- Quote from: fl0yd on April 19, 2005, 09:24:20 am --- The idea of soldering 12 wires onto the switches 1000 times is a bit frightening. --- End quote --- I don't mind doing the soldering/assembling myself if it means I'll get it cheaper :) -sab |
| Tiger-Heli:
--- Quote from: Hoagie_one on April 19, 2005, 09:39:43 am ---with this adapter, the 49 way and the gp49, you have a ton of games y ou can play without swapping. lol --- End quote --- Also, the GP-Wiz49 gives you 23 inputs per stick, so you could easily use 12 inputs for the rotary function, 1 for start, 1 for Coin, 1 for Pause/Esc (split between two interfaces), and have 8 left for buttons. Wire it this way, use MAME Analog Plus, and you don't need Druin's board. |
| fl0yd:
--- Quote from: Tiger-Heli on April 19, 2005, 10:13:41 am --- --- Quote from: Hoagie_one on April 19, 2005, 09:39:43 am ---with this adapter, the 49 way and the gp49, you have a ton of games y ou can play without swapping. --- End quote --- --- End quote --- |
| Tiger-Heli:
--- Quote from: fl0yd on April 19, 2005, 10:19:14 am --- --- Quote from: Tiger-Heli on April 19, 2005, 10:13:41 am --- --- Quote from: Hoagie_one on April 19, 2005, 09:39:43 am ---with this adapter, the 49 way and the gp49, you have a ton of games y ou can play without swapping. lol --- End quote --- Also, the GP-Wiz49 gives you 23 inputs per stick, so you could easily use 12 inputs for the rotary function, 1 for start, 1 for Coin, 1 for Pause/Esc (split between two interfaces), and have 8 left for buttons. Wire it this way, use MAME Analog Plus, and you don't need Druin's board. --- End quote --- ^^^ Now that is an idea I hadn't thought of. Couldn't it be used to select the mode that the stick was in as well? --- End quote --- As long as you use the mode button or software controls (command-line switching) then yes, you still have 23 buttons and the mode-switching will work. If you wanted the rotary switch to change modes, then you would lose 8 buttons, but you could use the GP-Wiz49 for the sticks and add one GPWiz or KeyWiz Eco for the buttons. |
| brandon:
anyway this would work for the williams style 49-way>? |
| Navigation |
| Message Index |
| Next page |
| Previous page |