| Main > Main Forum |
| "Konami to JAMMA" adaptor |
| << < (2/2) |
| paigeoliver:
Player 1 button 3 is at pin N, and player 2 button 3 is at pin 15. --- Code: --- Solder Side | Parts Side ________________________________|___________________________________ -5V | A | 1 | +12 Speaker | B | 2 | Speaker 2P Button 2 | C | 3 | 2P Button 1 2P Left | D | 4 | 2P Right 1P Start | E | 5 | 2P Start 1P Button 1 | F | 6 | 2P Up 1P Button 2 | H | 7 | Service Switch 1P Right | J | 8 | 1P Left 1P Up | K | 9 | 2P Down Coin (1) | L | 10| Coin (2) 1P Down | M | 11| Coin Counter (1) 1p Button 3 | N | 12| Coin Counter (2) Video Green | P | 13| Video Blue Video Red | R | 14| Video Sync | S | 15| 2P Button 3 GND | T | 16| GND GND | U | 17| GND +5 | V | 18| +5 --- End code --- There are 2 boards that use the full pinout, Super Basketball and Strategy-X. I own them both. Strategy-X might be really rare, but Super Basketball is really common. I already modified my Arcadeshop adaptor to support these titles myself. But I figure if you are gonna do them, then you might as well do them right. |
| Dav:
OK, thanks. I have a super basketball pcb, just never realized it had a 3rd button. I think I'm just going to hook up p1 though, Player 2 is more of a hastle since it intereres with the gyruss speaker and I'm not big on supporting cocktails anyway. P1 will hook up just fine. |
| Navigation |
| Message Index |
| Previous page |