Author Topic: Galaga Jamma adapter (Read 3680 times)

redcoats · « **on:** April 10, 2005, 01:29:31 am »

I have a Jamma wiring harness in one of my cabinets and I was just wondering if this is the adapter I need to run a Galaga PCB with my jamma harness?

redcoats · « **Reply #1 on:** April 10, 2005, 02:16:47 am »

Anyone?

tommy · « **Reply #2 on:** April 10, 2005, 03:11:28 am »

Thats what you need, it says it right on it.

redcoats · « **Reply #3 on:** April 10, 2005, 03:28:16 am »

Thats what you need, it says it right on it.

Ken Layton · « **Reply #4 on:** April 10, 2005, 11:24:31 am »

Yes indeed that's exactly what you need.

paigeoliver · « **Reply #5 on:** April 11, 2005, 02:39:31 am »

Thats what you need, it says it right on it.

Nah, that is just how arcadeshop labels their Moonwalker to "My Hero" adaptors.

redcoats · « **Reply #6 on:** April 11, 2005, 07:44:31 am »

Quote from: tommy on April 10, 2005, 03:11:28 am
Thats what you need, it says it right on it.

RayB · « **Reply #7 on:** April 11, 2005, 10:00:45 am »

Just make sure you have an original Galaga PCB and not a bootleg. The bootleg pin-outs don't match.

redcoats · « **Reply #8 on:** April 12, 2005, 10:54:03 pm »

Just make sure you have an original Galaga PCB and not a bootleg. The bootleg pin-outs don't match.

Thanks for the info Ray.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news