| Main > Main Forum |
| Height of control panel?? |
| << < (3/3) |
| SNAAAKE:
www.leafstation.com the mamestation 2 panel look like that(those huge mvsc2 showcase cabinet with huge panel) however wont be easy to built.luck luck |
| Dawgz Rule:
--- Quote ---Rule of Thumb #1: Measure the height of your belly-button while standingand. That (or minus one inch) should be the minimum height of the cp. Rule of Thumb#2. Flex your arms to a 90deg angle and measure the height of your elbow while standing. That is the maximum height of the CP; any higher and you will have to flex your arms up to an incomfortable position while playing. You can lower that height by a couple inches to give your arms some room to move around. --- End quote --- Did this and it seems to work great for standing and sitting on a stool. |
| kingstonking:
when you say 12 inches of the walk way do you mean 12 inches in front of the panel or what, a drawing or picture would help greatly? |
| zanna5910:
--- Quote from: Dawgz Rule on August 01, 2013, 06:48:19 am --- --- Quote ---Rule of Thumb #1: Measure the height of your belly-button while standingand. That (or minus one inch) should be the minimum height of the cp. Rule of Thumb#2. Flex your arms to a 90deg angle and measure the height of your elbow while standing. That is the maximum height of the CP; any higher and you will have to flex your arms up to an incomfortable position while playing. You can lower that height by a couple inches to give your arms some room to move around. --- End quote --- Did this and it seems to work great for standing and sitting on a stool. --- End quote --- Holy 11 year old thread revival batman! |
| Navigation |
| Message Index |
| Previous page |