| Main > Main Forum |
| Golden Tee, Centipede, Happ, Wico Trackballs |
| << < (3/3) |
| markrvp:
Do a search for Mouse Hack and you will find detailed instructions on this board. There are also detailed instructions in the PROJECT ARCADE book. If you haven't gotten this book already, I would recommend getting and reading the book before you get to far in your project. It will give you all the info you need and answer a lot of questions even before you think of them. I have an OSCAR controls mouse hack interface and it works very well. You can also buy a HAPP trackball that is already PS2/USB compatible without using an additional interface like Mouse Hack or Optipac. Go to the BUY/SELL/TRADE forum on this site and look for a thread by PONYBOY. He sells these and you can see the prices there. |
| u_rebelscum:
--- Quote from: RayB on April 06, 2005, 04:57:31 pm --- --- Quote ---You can make a normal happs TB a high lip model by just the top of the case, shown above --- End quote --- "by just" what? --- End quote --- Sorry, "by just replacing" :-[ |
| JODY:
I just took a good look at my new 3" translucent Happ trackball because I bought a used 2 1/4" without wires and used the wires off the 3" to test. Anyway, noticed that my 3" is a high lip. |
| Timstuff:
Ultimarc has a trackball for $36, but I don't think that it comes with any sort of interface to connect it with your PC. Basically, I want to know where I can buy something inexpensive ($10-$20) so that I can connect it to my PC like a mouse. http://www.ultimarc.com/JShopServer/product.php?xProd=24&xSec=2 |
| Timstuff:
After searching this forum, I found an excellent how to for hacking a mouse for a trackball interface. http://www.willcoxonline.com/mame/controlpanel/controlpanel.htm I probably have a spare mouse or two laying around my house somewhere, so if I go with the Ultimarc trackball I could make my control interface have a trackball for only $36. ;D |
| Navigation |
| Message Index |
| Previous page |