| Main > Main Forum |
| Strange Question |
| << < (2/2) |
| paigeoliver:
Previous cabinets have used every imaginable kind. Current cabinets. Cocktail. Has a microswitch behind the left coin return button on the coin door. Big wooden cabinet. Has enter, tab and escape buttons on the panel. This panel was pre-drilled by a previous mamer, if I had done it myself then they wouldn't be there. This cabinet also has 2 pinball buttons on each side (also pre-drilled, I wouldn't have done those myself either), which I seem to fairly often remap as service switches, pause buttons, throttle and such. Giagantor cocktail. I'll probably do the coin return switch trick again. |
| Fuzzguitar:
I don't have any admin buttons whatsoever. P1 and P2 together (esc) with an Ipac are all I need. They are near each other of course but have never once been accidently pressed even with little kids bashing away at games. The nature of having a shift button makes esc harder to trigger as you need to momentarily press it before the other function. |
| RayB:
I'll be hiding mine on the TOP, in recessed holes. |
| Navigation |
| Message Index |
| Previous page |