| Main > Main Forum |
| Interface for wheels? |
| (1/3) > >> |
| jelwell:
I'm planning on building a control panel with 2 360 wheels and 1 270 wheel. As well as 3 pedals. I'm wondering what combination of opti-pacs, a-pacs, wiz's, aki interfaces or whatnots would be the cheapest, and conversely the best, solution? I get the impression that the opti-pac is my only choice for 360 wheels? Or are there other spinner interfaces I'm overlooking? Joseph Elwell. |
| Flinkly:
you could get a minipac which is 39.99. but whatever you choose for your interface for your 360 wheels, your gonna need an a-pac or aki board. |
| jelwell:
--- Quote from: Flinkly on April 02, 2005, 10:41:01 pm ---you could get a minipac which is 39.99. --- End quote --- |
| Flinkly:
360 wheels, spinners, and mouses are all usually the same thing. |
| jelwell:
--- Quote from: Flinkly on April 02, 2005, 11:42:58 pm ---no offense to you, but you might want to read up on everything you want before you dive in and get stuff. --- End quote --- I did. That's why I'm asking. The minipac you suggested doesn't say anything about being compatible with Steering Wheels. The A-pac mentions steering wheels and pedals but doesn't say whether they're 360 or 270 wheels. It also says it has 4 analogue spots, that would imply to me that I could have 1 270 wheel and 3 analogue pedals. I'd still need soemthing for the 2 360 wheels though. The optipac only supports 1 360 steering wheel in USB mode (unless using Analog mame+). 2 in Serial Mode but my serial port is already being used for my Happs Trackball. :( Can I get a serial splitter? Joseph Elwell. |
| Navigation |
| Message Index |
| Next page |