Main > Main Forum
Molex for swapping between IPac & DC?
<< < (2/2)
daveg2000:
Any pics by chance?
Sasquatch!:
I'm surprised that molex connectors have such a low cycle number...I would've figured them to be a lot more robust than that.  Huh.
electricd:
I also use D-Sub connectors.  You can get a 50-pin male and female for under 10 bucks which should be more than enough.  You could probably use a standard dB25 connector if you are only using P1 and P2.  I used a 50 pin because I have all 4 player controls plus trackball and spinner.  I was able to get them all on a SCSI connector.  I have swapped it out at least 100 times and everything is still tight and workign great.

ED7
Navigation
Message Index
Previous page

Go to full version