Main > Main Forum

Ball top replacements for Happs 49-way sticks?

Pages: << < (4/4)

MrSaLTy:


--- Quote from: dabone on April 14, 2005, 10:36:58 am ---I could swear my new happs 49 sticks are labels midway on the top of the plastic.

Are there 2 different style of midways?


Later,
dabone


--- End quote ---

I can also conform this..... the new HAPPS 49ways I just got last week do indeed say midway on the top of the joystick base.  But I do not know if the stick is in any way different etc cause I have nothing to compare it to.

RandyT:

Here's the current story:

I got a demo in the other day.  Turns out that the narrow end is really hard to machine because it is so long.  The machinist does his best.  The tolerances were ok, but the surface quality could have been better on the lower part.

I tried it out without it connected to anything and the fit seemed pretty good.  It was when I connected it that I saw it was too loose.  A little slop at the grommet translates to a lot of movement at the sensors because they are so far away from the fulcrum.  It was registering a movement when it shouldn't have because of this.

So the tolerances need to be tightened up, and I need to give him another drawing.  Just haven't had the time due to all the other things going on at the moment.

Still trying.....

RandyT

Pages: << < (4/4)

Go to full version