Main > Main Forum
Coin Mech
<< < (5/7) > >>
daywane:
here is some photos of mine
1ST photo is a PS1 game pad I just took apart for you.
your dance pad is a playsations so just get a adaptor that has 2 or more slots
mine has 4 spaces for 4 playstation pads/

2nd photo a simple midway door with 2 coin mechs. VERY cheep EBAY
(coin mechs are cheep not door )
daywane:
you only need 1 positive and a ground per switch.
all switches can shre the same ground.
I only added the other positives to show you were you can get more places to solder if you screw one up
the left and right trigers would be best for you.
since they already have solder on them. just tin your wire and solder to the already made joints.
and send that monster of a coin mech back  :o and buy a simple mech.
can not find one? go to buy/sell/trade at the top mid of your screen.
post you need one. you will have one with in days
_Dom_:
ive been tlaking about it on IRC..

im going to connect this to my computer power supply tomomrow when i find my spare one because after looking at it i think i have a pretty good idea how it works

thanks for your help and i will post my results
_Dom_:
ok spent the last hour googling but to no avail... the manual i found was for the cashflow 126 & 129... but it turns out i have the cashflow 126DFx could anyone possibly help me find a manual (it has linked me to the mars international website but its keeping my sessions)..

so i am begging for a Cashflow 126 DFx manual  thank you very much

Dominic Liversidge
_Dom_:
also this mech has a terminal port what is the point of this please?
Navigation
Message Index
Next page
Previous page

Go to full version