Main > Main Forum

Look what I won!!! (and some questions.)

Pages: << < (2/3) > >>

nipsmg:

Medium Res Monitor it'll have to be.

Now here's the other question:

Is it worth going out and buying a medium resolution monitor, or should I just shoot for one of the 27" multi resolution monitors? (D9200, etc?). 

If that's the case, I definitely don't have the money at the moment.  Is there an interim CHEAP solution to the video issue (Granted, I know I'll be sacrificing quality).

--NipsMG

versapak:

Heh


I always find it funny how we tend to say we WON, when we get stuff off of ebay.

YAY, I just won a this or that, and all I have to do is buy it! :)




nipsmg:

OK, I was looking on Happs for a monitor, and I came across this:

http://www.happcontrols.com/monitors/49054600.htm

It says it uses RGB TTL (positive or negative)

I've got a Proton VM-290 27" monitor in my cab with coax, composite, and a 9 PIN RGB TTL connector on it. (with a switch for positive or negative).

Now I had trouble getting this to work with the arcade VGA per this thread:
http://forum.arcadecontrols.com/index.php?board=4%3baction=display%3bthreadid=17274

But I'm not positive if this is a multisync monitor or not.  is there any chance I might have just severely lucked out here?

--NipsMG.

nipsmg:

Well, life is good.

Apparently, the golden tee 2004 board has a dip switch to select between Med Res and Std Res video output.  Life is AWESOME.

19rjs99:

You can buy a converter from www.jrok.com for about $75 to use the TV you have in standard res. I built a couple older portable golden tee games with that adapter. It works well with the S-video cable.

Pages: << < (2/3) > >>

Go to full version