| Main > Main Forum |
| Can you use an arcade steering-wheel with pc steering-wheel innards? |
| (1/2) > >> |
| RoboG2:
I would like to have a sitdown driving cab for newer games (NFSU2, etc.), but would not like to use those pc steering-wheels, as they do not look as realistic as thos found in some arcade machines. Can you use an arcade steering-wheel (I believe 270 degrees for newer games) with pc steering-wheel innards (pcb, etc.)? Thanks in advance. |
| Flinkly:
you could pick up the actual old school steering wheel of ebay, and then figure out how to replace it with your pc steering wheel...other than that, i would say no since technology has changed alot since then. if you found any old arcade equipment that was compatible with todays equipment, i would be very suprised. |
| APFelon:
There are products out there that will allow you to use an arcade wheel with your PC. It's a small PCB that operates similar to the J-PAC or I-PAC. Give me a moment and I'll find a link for you... APf |
| gnateye:
ooh, ooh, ooh im super interested in this too. how about using some adapters on that adapter to use the wheel with consoles? force feedback or vibration?? im making a console driving cab right now, and the wheel i have is OK, but i wish it was more sturdy....... waiting with baited breath! gnat |
| APFelon:
Heck, give the A-PAC a look. It has recently been released by arcade control legend Andy Warne and I will personally vouch that his products are top notch. http://www.ultimarc.com/a-pac.html Good luck! APf |
| Navigation |
| Message Index |
| Next page |