| Main > Main Forum |
| Tron restrictors??? |
| << < (6/7) > >> |
| NoOne=NBA=:
There is a metal collar around the Tron sticks that actually rolls around the stick as the stick contacts the upper restrictor, to prevent wear on the upper restrictor. I'm not sure if the plastic sleeve on the shaft's bottom was used originally on Tron, but they used them on Xenophobe to prevent wear on the bottom restrictor. |
| rohan:
I'd take two if you're able to make them! |
| daywane:
--- Quote from: NoOne=NBA= on March 20, 2005, 03:07:59 pm ---If you make them out of the same material that Midway did, you will also need the often missing plastic sleeve for the bottom of the stick. Those going missing, or wearing out, cause the metal stick to really shred the restrict or itself. --- End quote --- I believe you are correct. I did not know those sleeves were missing on some stick out there. I lucked out, I bought my tron stick and Xenophobe stick off of people here at B.Y.O.A.C. both are in fair to very good shape, and have all pieces to them Both at prices better than EBay here is what it looks like. I would have posted these yesterday . I did not think it would show up. I only found out it shows by mistake. I was showing poneyboy his grips fit the tron stick and I saw the xenophobe sitting there |
| coasternuts:
What the heck is that second picture? Does that piece fit on the bottom of the joy above the leaf switches? I noticed my restrictor was a little worn and I definately don't have any plastic piece like that. |
| markrvp:
I think that's the prototype of the bottom restrictor he's making. He is making it out of clear Lexan instead of red plastic. |
| Navigation |
| Message Index |
| Next page |
| Previous page |