| Main > Main Forum |
| Help with mouse Y axis |
| (1/1) |
| Walkinshaw:
Hi, I have finished adding 2 x 360 steering wheels to my cabinet and using oscars mouse hack and opticals I am having a problem getting Mame 0.93 to recogonise the second player. For games like Offroad and super sprint, player 1 is shown as Mouse 1 Axis X and works great but for player 2 its either none or n/a. The mouse pointer works fine in windows while moving the second wheel it goes vertical up and down but when I try and set it in mame using the tab menu (in game) it will not detect no matter how many times I spin the wheel. Is there any other way of setting this wheel up so the 360 games with show player 2 as Mouse 1 axis Y ? Thanks |
| Walkinshaw:
ok this is annoying as hell. I can't get player 2 to work in super sprint or off road. Can someone help me with a cfg file to get this running. I have a mouse hack and player 1 is shown as Mouse Axis X but player 2 shows nothing and I can't auto detect it by spinning the wheel in the tab menu. I have tried doing a special config file but I think I maybe doing something wrong. Player one works fine with this setup but if I add anything for the player 2 dial then it just resets itself and removes the lines I add. <mameconfig version="10"> <system name="offroad"> <input> <port type="P1_BUTTON1" mask="16" defvalue="16" value="16"> </port> <port type="P2_BUTTON1" mask="32" defvalue="32" value="32"> </port> <port type="P3_BUTTON1" mask="64" defvalue="64" value="64"> </port> <port type="SPECIAL" mask="1" defvalue="1" value="1"> </port> <port type="COIN3" mask="2" defvalue="2" value="2"> </port> <port type="COIN2" mask="4" defvalue="4" value="4"> </port> <port type="COIN1" mask="8" defvalue="8" value="8"> </port> <port type="SPECIAL" mask="1" defvalue="1" value="1"> </port> <port type="SERVICE" mask="8" defvalue="8" value="8"> </port> <port type="P1_PEDAL" mask="255" defvalue="0" value="0" keydelta="10" centerdelta="10" sensitivity="100" reverse="no"> </port> <port type="P2_PEDAL" mask="255" defvalue="0" value="0" keydelta="10" centerdelta="10" sensitivity="100" reverse="no"> </port> <port type="P3_PEDAL" mask="255" defvalue="0" value="0" keydelta="10" centerdelta="10" sensitivity="100" reverse="no"> </port> <port type="P1_DIAL" mask="255" defvalue="128" value="128" keydelta="10" centerdelta="10" sensitivity="100" reverse="no"> </port> <port type="P2_DIAL" mask="255" defvalue="128" value="128" keydelta="10" centerdelta="10" sensitivity="100" reverse="no"> <defseq type="standard">MOUSECODE_1_ANALOG_Y OR JOYCODE_2_ANALOG_Y</defseq> <defseq type="decrement">KEYCODE_D OR JOYCODE_2_LEFT</defseq> <defseq type="increment">KEYCODE_G OR JOYCODE_2_RIGHT</defseq> |
| Walkinshaw:
Fixed it now. Just needed MOUSECODE_1_ANALOG_Y |
| Navigation |
| Message Index |