| Main > Main Forum |
| Buttons double firing -- please help |
| << < (6/6) |
| tommy:
--- Quote from: NoOne=NBA= on March 18, 2005, 08:49:44 am --- --- Quote from: cholin on March 17, 2005, 06:01:36 pm ---Solderring is frowned upon because if you order some Quick Disconnects for $6, you have better contact --- End quote --- Wrong. 1) Soldering is NOT frowned upon by alot of people around here. 2) A good solder joint is a better connection than disconnects. Do you suppose there's a reason they don't put all the guts of a radio in with press fittings? You dont need to make your microswitch hold up in a hurricane, just as long as the wires are touching it will work, dissconnects are fine , why dont you weld your tire on the hub so theres no chance it will ever fall off, microswitches and radios , apples and oranges. --- End quote --- |
| ahofle:
Well I did take apart the switch that was bad, and I tell you it's as clean as a whistle in there, with absolutely zero oxidation. The contacts all look correct when I press the red button. I just don't get it. Andy from ultimarc mentioned that American made cherry switches succumb to this problem much more than the European ones. Anyway I ordered a bunch of replacements. I also had a friend of mine test out his buttons and he found 4 that exibited this same behavior in notepad. Thanks again for all the help. |
| Navigation |
| Message Index |
| Previous page |