| Main > Main Forum |
| Peel off old laminate or laminate right over it? |
| << < (2/3) > >> |
| tommy:
Just use some extra glue under the new lami , the right way is to remove the old but if its too much trouble throw it on top. |
| Goz:
Break out the heat gun and grab some beer it can take some time; but in the long run it will be worth it. -Goz |
| Hoagie_one:
Can a hair dryer get hot enough....dont have a heat gun |
| Goz:
--- Quote from: Hoagie_one on March 15, 2005, 09:58:09 am ---Can a hair dryer get hot enough....dont have a heat gun --- End quote --- Yeah it can, but you wiill need to hold it over an area for a minute or two before you can peel. -Goz |
| scatter:
We use some type of solvent, like lacquer thinner. Put it in a squirt bottle like an old wood glue bottle or something like a squirt bottle (not a spray bottle). Drip it onto the edge of the laminate and it will come right up with a little work from a putty knife or painter's tool. Do this in a well ventilated area and wait until the solvent has evaporated before putting any contact adhesive for the new laminate on it. -b |
| Navigation |
| Message Index |
| Next page |
| Previous page |