| Main > Main Forum |
| Anyone used the happs 1.5 inch trackball? |
| << < (3/4) > >> |
| Quarters:
I would order a 2 1/4" TB. You will not be able to fit the mounting plate. With a bit of creativity I'm sure you can find a way to install it. My TB is a Ultimarc 2 1/4 and my CP is no larger than yours. http://forum.arcadecontrols.com/index.php/topic,27612.0.html |
| Flinkly:
um, i was just thinking, but since you have a metal control panel, you don't need a mounting plate, which means you could fit a 2 1/4 inch trackball in there no problem...i think. check the dimension though. |
| evlbeaver:
Actually only the player 1 and 2 positions are metal. The side panel is wood. That makes it very tight even for some joysticks. I am going to try out the external enclosure for awhile and see how that feels. Then I may rig a removable shelf on the back of the cabinet. If that works out I may permanently alter the cabinet and build a fourth control panel similar the one on the other side. Either that or try to build some kind of swappable arrangement for the panel with the spinner. Somehow this approach just seems cooler if I can find a way to do it right. Plus its the correct orientation for Centipede/Millipede. I am giving up on the 1.5 inch idea though. I agree it would be too small. |
| Wienerdog:
That's what I would do, build that side panel as a swapable CP. Now THAT is something we could all help out with! |
| whammoed:
Are those 9" or 11" panels on the ends? |
| Navigation |
| Message Index |
| Next page |
| Previous page |