| Main > Main Forum |
| Universal Monitor/Tube mounting brackets - NO LONGER IN STOCK |
| << < (3/17) > >> |
| paigeoliver:
So does this mount a 27" monitor or a 27" TUBE? |
| Ken Layton:
So these only mount the monitor horizontally? |
| 1UP:
--- Quote from: paigeoliver on March 10, 2005, 01:10:36 am ---So does this mount a 27" monitor or a 27" TUBE? --- End quote --- The tube needs some kind of frame already attached, like what normally comes on a WG D9200 or similar. It does not need an enclosure. --- Quote from: Ken Layton on March 10, 2005, 01:19:14 am ---So these only mount the monitor horizontally? --- End quote --- I'm sure you could use them to mount a monitor vertically or face-up, provided there is something to mount them to. They might even work in a rotating setup. I have not used them in this application, so I can't say 100%. I will try to do some testing with different mounting positions when I get time. That said, I would have to say that they would work pretty much anywhere. Again, you'd want to use at least 3/4" wood and probably 5/8" or 3/4" screws. |
| southpaw13:
So can you confirm that it fits a d9200? I will probably order a set...Thanks... Southpaw |
| Lilwolf:
btw, I know it might be a little late... but it would be pretty cool if the mounting brackets came out and had a spot for perfect bezel installs. Seems like the bezels always fit at the same depth and would be great to have something that fit with that. Also, you might want to mention the exact width (inside) that is needed to use these. And too bad... I just mounted my bezel a few weeks ago (really after having it for 2 years... and having the cabinet for 5) I could have given you the exact size / locations for an EYGO monitor after taking it out of its case. |
| Navigation |
| Message Index |
| Next page |
| Previous page |