Main > Monitor/Video Forum
Name That Monitor's Problem!
RetroJames:
--- Quote from: Ken Layton on March 09, 2005, 02:22:59 am ---Sometimes resistor R313 (470 ohms, 7 watts) which is mounted vertically in the corner of the board goes open circuit which also kills vertical deflection. Capacitors C313 (100 uf @ 160 volts) and C701 (1000 uf @ 25 volts) cause vertical height problems when they go bad.
My paypal is KLayton888@aol.com
--- End quote ---
PayPal sent! ;)
Ken Layton:
Wakerlet:
You could buy one of the Wei-ya replacement chassis that retrofits the Electrohomes from either one of these guys:
http://www.home.earthlink.net/~video1963/id1.html
http://yp.bellsouth.com/sites/alvaamusement/
One of those chassis would repair your old CAO and it comes with full instructions. Plus the replacement chassis uses negative sync!
wakerlet:
--- Quote from: Ken Layton on March 09, 2005, 10:09:07 am ---Wakerlet:
You could buy one of the Wei-ya replacement chassis that retrofits the Electrohomes from either one of these guys:
http://www.home.earthlink.net/~video1963/id1.html
http://yp.bellsouth.com/sites/alvaamusement/
One of those chassis would repair your old CAO and it comes with full instructions. Plus the replacement chassis uses negative sync!
--- End quote ---
Just ordered one from Alva yesterday, thanks. It only cost ~$58 with shipping for the G07 replacement. Seriously, if you want the CAO chassis let me know (free for you). Otherwise it'll go up on ebay.
-Todd
Ken Layton:
No, I don't need it. Thanks for the offer though. :) Go ahead and ebay it and hopefully it'll bring you some money to offset what you've spent on the CAO. Let us all know how your new Wei-ya chassis works & how you like it.