| Main > Main Forum |
| Getting ready to build |
| (1/4) > >> |
| bicho:
Today I finally decided to order the parts I need to make the control panel. I am a little sceptical on how to put all these thing together and that I have everything I need. This is what I ordered. (3) 4-8 way comp. joysticks (8) push buttons. I already had 18 from a friend that works with electrical stuff, and they happen to be happ's. (1) 3" trackball (1) oscar spinner (1) hangstrong trackball/spinner encoder (1) Keywiz keyboard encoder Is there anything I need to order? I had in mind to install a light gun but it's getting to expensive right now, perhaps in the future I will consider it again. |
| JODY:
Depends... Did you want to use any t-molding around the outside edge of the control panel? I'd use some .187 wire connectors on the sticks and buttons to prevent soldering. |
| GGKoul:
One note.. The Comp joysticks you order one works in a 8 way or 4 way mode. There is no quick way to switch from 8 to 4 way mode like a T-Slik Plus. |
| tommy:
--- Quote from: GGKoul on March 03, 2005, 11:12:18 pm ---One note.. The Comp joysticks you order one works in a 8 way or 4 way mode. --- End quote --- |
| mahuti:
If your panel is wood, you'll need a trackball mounting plate. |
| Navigation |
| Message Index |
| Next page |