| Main > Main Forum |
| * SlikStik Lighted Joystick Handles -New Photos- * |
| << < (23/27) > >> |
| KevSteele:
I'm going to be getting a set of all 8 colors for a review, and I'll be sure and take some video of the joysticks both lit and unlit, in a bright room and dark. Video is certainly the best way to get a feel for the overall lighting (I'll "arc" around the joysticks with the camera) I'm looking forward to reviewing these...between these and the translucent buttons and the new LED driver boards coming out, my CP's about to get a lot brighter... ;D Kevin |
| pointdablame:
If Christian gets back to me and I can get over there on Saturday, I should be able to take some videos as well. My cam takes pretty decent video, and I can hold around 12 minutes or so, so we'll see what happens. I'd need a place to host the videos though, but I'll cross that bridge when I get to it. |
| stellarola:
They look really soft...I don't know why. I want to touch the balls....whoops! :-* |
| KevSteele:
--- Quote from: pointdablame on July 22, 2005, 12:45:37 am ---If Christian gets back to me and I can get over there on Saturday, I should be able to take some videos as well. --- End quote --- |
| Toonces:
--- Quote from: amerish on July 21, 2005, 02:20:37 pm ---Just got my two in the mail today. They are for two different cabs so I did not need them joined together (nice shrink wrap though). Are there resisters on the wire feeds or can I just cut the wires? I also want to convert the Happ super to 4 way. When I open it up, should I be worried about anything or need to be specially careful with. On a side note, for those on the fence, they are SWEET and the glow fills the entire ball top. I also am thinking of powering it with the optipac, dont think it should be a problem. --- End quote --- Any possibility that you could measure the shaft from the lowest e-clip to the bottom of the ball for me? I want to see if they'd work in my Robotron cab. Thanks! Toonces |
| Navigation |
| Message Index |
| Next page |
| Previous page |