Main > Main Forum

slikstik p360 handles vs p360 base...

Pages: (1/2) > >>

Flinkly:

i was wondering if someone could help me out with this...i got some slikstik steel handles for my p360 and i seem to have a problem hooking it all together.  if i include the space for a wooden control panel, there is no way i can get the e-ring on the end of the shaft, let alone the washer they instruct me to add in as well.  do i leave this off?  it seems to work if i do, but i'm just not sure and want to get it right.  thanks for the help guy's.

Will:

Did you count for the 1/4 inch recess you should have at the bottom of your cp.I think you have not purchased the bible,shame on you.

Flinkly:

i haven't even stuck them in a cp yet.

Flinkly:

just to clarify, some people router out under their panels for their joysticks due to the fact that they plan on adding plexiglass to the top of theiir control panel.  i think a manufacturer counts on a wood cp to be 3/4 of an inch and so if you plan on adding another 1/4 of plexi, you should take that 1/4 out somewhere else, thus routering the underside.  at least that is how i understood it.

woodywood:

I just received some the other day and they had instructions in them. On the instruction sheet it said to leave out the wood/metal spacer. You don't need to use them.

Pages: (1/2) > >>

Go to full version