| Main > Main Forum |
| slikstik p360 handles vs p360 base... |
| (1/2) > >> |
| Flinkly:
i was wondering if someone could help me out with this...i got some slikstik steel handles for my p360 and i seem to have a problem hooking it all together. if i include the space for a wooden control panel, there is no way i can get the e-ring on the end of the shaft, let alone the washer they instruct me to add in as well. do i leave this off? it seems to work if i do, but i'm just not sure and want to get it right. thanks for the help guy's. |
| Will:
Did you count for the 1/4 inch recess you should have at the bottom of your cp.I think you have not purchased the bible,shame on you. |
| Flinkly:
i haven't even stuck them in a cp yet. |
| Flinkly:
just to clarify, some people router out under their panels for their joysticks due to the fact that they plan on adding plexiglass to the top of theiir control panel. i think a manufacturer counts on a wood cp to be 3/4 of an inch and so if you plan on adding another 1/4 of plexi, you should take that 1/4 out somewhere else, thus routering the underside. at least that is how i understood it. |
| woodywood:
I just received some the other day and they had instructions in them. On the instruction sheet it said to leave out the wood/metal spacer. You don't need to use them. |
| Navigation |
| Message Index |
| Next page |