Author Topic: Dont bang on my cp (Read 3948 times)

tommy · « **on:** February 16, 2005, 04:22:46 pm »

mirrored cp overlay, i still need to drill all the holes yet ,its not going to be easy without chipping

tommy · « **Reply #1 on:** February 16, 2005, 04:25:51 pm »

Stingray · « **Reply #2 on:** February 16, 2005, 04:36:16 pm »

Is that a glass mirror? That's pretty zany. I have no idea how you would cut round holes in glass, but it's nifty idea.

-S

tommy · « **Reply #3 on:** February 16, 2005, 04:39:20 pm »

its not that hard to drill glass with 1 1/8 carbide bit like the ones we use to drill outlet holes in mirrored walls im not sure if im going to like the finished product though ill find out soon

nostrebor · « **Reply #4 on:** February 16, 2005, 05:01:58 pm »

Cool.

Ihope you have a big bottle of Windex handy

tommy · « **Reply #5 on:** February 16, 2005, 05:10:48 pm »

your not supposed to use windex on mirrors it has ammonia that eats away the back windex is for glass not mirror but i get you joke

RandyT · « **Reply #6 on:** February 16, 2005, 05:11:39 pm »

Sounds like you need to make friends with someone that owns a waterjet cutter.

I think you're gonna have a tough time cutting it, but if you insist on trying, make a little plasticene dam around where you are drilling and flood the area with some coolant. If it starts to glow just once......CRACK!

RandyT

tommy · « **Reply #7 on:** February 16, 2005, 05:14:42 pm »

thanks randy i work with glass for a living i wont have any problems thanks for commenting though ,its like a carbide diamond bit that i use with antifreeze to keep the mirror cool while drilling

Apollo · « **Reply #8 on:** February 16, 2005, 05:22:28 pm »

That thing is going to be permanently filthy dude, cool idea but you would proably be better of using polished stainless steel ( way more expensive though ).

SpamMe · « **Reply #9 on:** February 16, 2005, 05:26:39 pm »

Yikes. I don't want to pee on your parade or anything, but how thick is that glass? It seems like, with the button holes spaced as closely as they are, there's going to be quite a bit of stress on the thin areas between them, and if anybody uses anything other than a feather-touch to play...

tommy · « **Reply #10 on:** February 16, 2005, 05:27:45 pm »

i didnt really think of that apollo

tmasman · « **Reply #11 on:** February 16, 2005, 05:28:08 pm »

Small suggestion...
Route out an area on the top of your wood to allow for the dust washer/cover to go under the mirror... That washer floating on top of the mirror would probably detract from the clean cut look.

Also, do you plan on beveling all the edges? (Including the cutout for the joysticks?)

Neat idea if you've got the tools to make it happen (which it sounds like you do if you work with it f/ a living).

Keep us updated.

- tmasman

tommy · « **Reply #12 on:** February 16, 2005, 05:39:58 pm »

i was going to bevel the edges but if it breaks id rather not send it out to be beveled again i could just cut a new

DaveMMR · « **Reply #13 on:** February 16, 2005, 05:52:09 pm »

How strong is that glass? I have a tendency to bang on control panels when angry. Hope your friends don't do that and have to be rushed to the emergency room. Otherwise, it's a cool idea.

tommy · « **Reply #14 on:** February 16, 2005, 05:54:18 pm »

lmao dave not recently its not easy to explain how strong it is but its stronger when its atatched 3/4 wood

GGKoul · « **Reply #15 on:** February 16, 2005, 05:57:38 pm »

I tried this with Mirror Plexi, and I hated it. Too much cleaning and too many fingerprints.

http://forum.arcadecontrols.com/index.php/topic,16419.0.html

tommy · « **Reply #16 on:** February 16, 2005, 05:59:37 pm »

Quote from: GGKoul on February 16, 2005, 05:57:38 pm

I tried this with Mirror Plexi, and I hated it.

GameOver · « **Reply #17 on:** February 16, 2005, 06:02:07 pm »

CUT IT! I WANNA SEE! Then drop a button in.

GG - yours looked awesome, but no finished pics? Did you ever finish it?

RayB · « **Reply #18 on:** February 16, 2005, 06:25:09 pm »

Neat idea. I assume there will be some sort of supporting layer under the glass (sheet of wood?)

My comment is that it would be very distracting, cuz you'll see relfections of yourself/arms when playing.

tommy · « **Reply #19 on:** February 16, 2005, 06:31:25 pm »

im going to have to drill it in a few days when i can bring all my glass tools home

tommy · « **Reply #20 on:** February 16, 2005, 06:37:29 pm »

it will be great i could smile at myself in my cp when i beat my old high scores lol

AmericanDemon · « **Reply #21 on:** February 16, 2005, 07:33:18 pm »

That CP is crying out for backlit buttons and trackball.

tommy · « **Reply #22 on:** February 16, 2005, 07:42:03 pm »

im not much into trackball games and this is not a mame cab so this setup will be fine for now , also i dont want to get to crazy with drilling into mirror, it will weaken it to much , lighted buttons is a great idea though

RayB · « **Reply #23 on:** February 16, 2005, 10:51:32 pm »

You could put flashing lights all around it. Really get a Vegas theme going.

danny_galaga · « **Reply #24 on:** February 16, 2005, 11:35:05 pm »

both tommy and gg- you need to have a nice ceiling to go with that mirror finish! especially gg, who wants to always be looking at THAT ceiling?

tommy · « **Reply #25 on:** February 16, 2005, 11:38:51 pm »

i hope i dont go nuts and mirror the whole dam cab

DaveMMR · « **Reply #26 on:** February 17, 2005, 12:07:00 am »

Yeah, I completely failed to realize there was going to be wood under there. I don't know why I'm so dense lately. Too many drugs, not enough hugs I suppose.

But I do like the idea. It may be a pain to cut but with some cool lighting (and I do mean 'crank' up the number of glowing things on that cab) in a dark room, it'll be quite the conversation piece.

As for cleaning: just keep some glass cleaner wipes around (they're like baby wipes except I wouldn't recommend using them on the 'ole 'bum bum').

RetroJames · « **Reply #27 on:** February 17, 2005, 12:30:57 am »

Quote from: tommy on February 16, 2005, 11:38:51 pm

i hope i dont go nuts and mirror the whole dam cab

tmasman · « **Reply #28 on:** February 17, 2005, 08:44:40 am »

Quote from: 1hookedspacecadet on February 17, 2005, 12:30:57 am

hehe...instead of smoked plexi he could get a one way mirror.

If there was an entire mirrored cab, that would be awesome...
You can't even see the screen until it's turned on...

Stainless Steel joys & grey (or silver painted) buttons...

Ok... I'm not totally awake yet... That all almost sounded cool.

Stingray · « **Reply #29 on:** February 17, 2005, 10:24:43 am »

Quote from: tmasman on February 17, 2005, 08:44:40 am

Quote from: 1hookedspacecadet on February 17, 2005, 12:30:57 am
hehe...instead of smoked plexi he could get a one way mirror.

If there was an entire mirrored cab, that would be awesome...
You can't even see the screen until it's turned on...

Stainless Steel joys & grey (or silver painted) buttons...

Ok... I'm not totally awake yet... That all almost sounded cool.

Woo! Groovy!

-S

Sinner · « **Reply #30 on:** February 17, 2005, 11:03:07 am »

Would it be possible to put a thin layer of plexi over the mirror?? I think that would cut down on the fingerprints, smudges, etc and still give the desired effect...

SirPeale · « **Reply #31 on:** February 17, 2005, 01:00:28 pm »

If anything it will show off more things. As the plexi scratches (and it *will* scratch) you'll see not only the scratch, but the reflection of the scratch as well.

Frankly, although the mirror as some neat 'wow' appeal, even one fingerprint (which it *will* get) will make it look unseemly.

DrewKaree · « **Reply #32 on:** February 17, 2005, 01:13:02 pm »

So if you made a seamless mirrored cabinet, would that be considered "unseam-ly"?

tommy · « **Reply #33 on:** February 17, 2005, 02:12:47 pm »

I still need to drill the holes a hair bigger for the controles to fit ,but its almost done

tommy · « **Reply #34 on:** February 17, 2005, 02:54:01 pm »

Witchboard · « **Reply #35 on:** February 17, 2005, 03:43:45 pm »

Now would be about the time I would drop mine. You should seriously consider router under the glass for the dust washers on your joys. Of course you would have to knock the sharp edge off the holes around the joystick shafts, but that shouldn't be a problem for somebody with your tools.

tommy · « **Reply #36 on:** February 17, 2005, 04:46:13 pm »

Im probably going to use a plasic mirrored cover on top of the joys, it will be just like the black ones but mirrored anybody have any mirrored buttons for sale

cholin · « **Reply #37 on:** February 17, 2005, 05:53:48 pm »

Mirrored buttons...wow that would be crazy! Especailly tinted mirrored buttons somehow. I don't know how you came up with an idea like this, but let me tell you, as insane as it is, it is VERY neat. Im not fond of cleaning a mirror every single time someone plays though

Nicely done though man, lucky you work with this kind of stuff eh.

GameOver · « **Reply #38 on:** February 17, 2005, 05:56:07 pm »

Most Excellent! Nice work. I like RayB's idea for the Las Vegas theme with lights & stuff. That would be sweet w/the mirror(s?). Your side art could be showgirls/roulette or sometihin.

tommy · « **Reply #39 on:** February 17, 2005, 06:03:52 pm »

Cmon guys dont get me started , i was thinking of etching or sandblasting something on the cp also ,not sure what i would put though only time will tell ,ill have to quit my job soon to work on this thing hmm lights and las vegas theme you say showgirls sandblasted into the mirror , too many ideas to think about thanks for your ideas


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news