| Main > Main Forum |
| New Product - V2 spinner & Push Kit |
| << < (6/19) > >> |
| OSCAR:
Here are some more dimensions of the V2 w/ the Push Kit Note that the shaft is shown set up for a 3/4" control panel. If your control panel thickness will be less than 3/4" add the difference between your cp thickness and 3/4", and add that to the overall depth. For example, if you have a 1/2" thick control panel, add 1/4" to the overall depth as that is the amount that the shaft and switch bracket will need to slide down. |
| Shape D.:
--- Quote from: GGKoul on February 08, 2005, 10:55:32 am ---Oscar, You said above that you're working on adding a pull to this spinner. Just wondering if one purchases the Spinner with the push now, would the pull be a simple attachment? Thanks! --- End quote --- worst case senario you'd just have to buy the pus/pull set up if it becomes available. the way I see it ill only end up out $18 at the most. |
| OSCAR:
Lilwolf - the V2 has very good response, very close to the Vortex. For Tempest, I had it set up for my Vortex and had the Sensitivity set at 40%. To get the same amount of travel with the V2, I changed the Sensitivity setting to just around 50%. For those interested, 180 deg of knob rotation should give you 3 full "spots" in Tempest to be the same as the original game. A customer sent me this info, and I recently verified it for myself when one of my buddies picked up a Tempest cab. :) |
| GGKoul:
--- Quote from: Shape D. on February 08, 2005, 06:27:11 pm --- --- Quote from: GGKoul on February 08, 2005, 10:55:32 am ---Oscar, You said above that you're working on adding a pull to this spinner. --- End quote --- --- End quote --- |
| 1UP:
Thanks for the dimensions! |
| Navigation |
| Message Index |
| Next page |
| Previous page |