Main > Main Forum

Wiring buttons by a noob

Pages: (1/2) > >>

jck_strw:

I wired up a "mock" control panel back in November (successfully, I might add :) .  Now that I'm finally nearing the end of construction, I'm back to wiring the actual "production" control panel.  But now I can't remember how I wired up my mock panel and I can't find any documentation.  My question:

--The cherry switches have 3 "prongs".  The single prong is used as the ground, correct?  I daisy-chain that to all the other switches and then connect that to the ground on the iPAC.  One of the "pair" prongs is the wire-directly-to-the-iPAC, correct?  So what's the other prong for? 

Thanks!

Shape D.:


--- Quote from: jck_strw on January 31, 2005, 12:46:01 pm ---I wired up a "mock" control panel back in November (successfully, I might add :) .  Now that I'm finally nearing the end of construction, I'm back to wiring the actual "production" control panel.  But now I can't remember how I wired up my mock panel and I can't find any documentation.  My question:

--The cherry switches have 3 "prongs".  The single prong is used as the ground, correct?  I daisy-chain that to all the other switches and then connect that to the ground on the iPAC.  One of the "pair" prongs is the wire-directly-to-the-iPAC, correct?  So what's the other prong for? 

Thanks!

--- End quote ---
one is NO for normally open and the other is NC for normaly closed.

Thenasty:


--- Quote from: jck_strw on January 31, 2005, 12:46:01 pm ---I wired up a "mock" control panel back in November (successfully, I might add :) .
--- End quote ---


jck_strw:

Excellent, thanks for the help.

On additional question--I have 2 Wico joysticks in my CP.  There's only 2 prongs.  Which is the ground and which is the NO? 

Thanks again!



Quarters:

Tutorial here:
http://arcadecontrols.com/arcade_wiring.shtml

Pages: (1/2) > >>

Go to full version