Main > Main Forum

I'm stumped - My CP woes

Pages: << < (2/2)

markrvp:

I wired up my control panel last night with an I-pac 4 and have the same problem you describe.  2 of player 3's buttons work but the rest of player 3 and all of player 4's inputs don't work.  I finished the wiring at 3 in the morning, so I was too tired for trouble shooting, but it appeared all the wiring was correct. 

Have you found a solution yet?

subcriminal:

I have similar problems. I've got an old style I-Pac and I've tried the jumper settings and programming, P1 button 1,2 and 4 don't work and P1 start won't hold on. They all show as working in WinIpac but don't work in MAME, but all is OK when using a keyboard. I'm now going to look into it again after a late night session last night and not really getting anywhere! If anyone knows if it's a MAME problem please post. I'm using MameWah and DOS Mame under XP.

markrvp:

Is the Ipac plugged into the PS2 port or USB?

freakinshoe:

did u go into the mame menu, when u load the rom an configure it to work on those controls,,,, open a text file and start hitting buttons on ur cp and that will tell ya if they r working also.


Pages: << < (2/2)

Go to full version