| Main > Main Forum |
| controller question by newbie please. |
| (1/3) > >> |
| kiddk1:
sorry if this sounds ignorant but I am new and have been reading and plan on building my own mame cabinet. I plan on building my own controls rather than buying an x-arcade or hot rod. What confuses me is once I build the controls(2 joysticks, buttons, trackball) how do I connect them to the pc, do they come with usb cables or is it complicated. Thank you. p.s. if someone has a step by step for controls can you please give me the link. thanks again. |
| Wyluli:
Your easiest route is to buy an IPAC card from ultimarc. You hook up the wires from the joysticks and buttons to the card, and the card connects to the computer via a USB cord (you order the cord with the card). www.ultimarc.com |
| Arcadiac:
First of all, welcome to the board. |
| penjuin:
Do what i did and run to a book shop to buy a copy of "Project Arcade". It REALLY helps. |
| kiddk1:
thank you, I will keep researching. One more question, there is an Ipac2 and an Ipac4 is the only difference the amount of inputs you can connect? thanks again |
| Navigation |
| Message Index |
| Next page |