| Main > Monitor/Video Forum |
| Pincushion and/or screen adjustment on G07? |
| (1/1) |
| quarterback:
I just hooked up a G07 to my cab for the first time. I got the monitor for free and it has some burn-in AND I accidentally 'removed' the neckboard so I've just finally gotten around to hooking it up. The good news: It works! Not only that, but the colors and brightness are better than the 19" WG that's currently in my cab. Yeah! The bad news: It's got some pincushioning 'issues' and the image isn't centered on the screen and it looks like there might be some convergence issues. I thought to myself "Hey, no problem, I'll just adjust it the way I adjust my computer monitor. There must be some controls somewhere" but after doing some more reading, I'm afraid I might have been too optimisitic. Is there any way for me to adjust these things? It's a G07-CBO (38-G07904-K0) Thanks |
| Ken Layton:
There are two "raster position" adjustments for horizontal and vertical positioning. They are over towards the flyback and they are three tabs and a jumper wire for each vertical and horiz. They are marked for horiz: left-center-right. They are marked for vertical: up-center-down. Don't even think of putting the horiz jumper wire onto the vertical adjustment tabs or you'll damage the monitor. Naturally this monitor will probably need a capkit if you are experiencing a pincushion problems. |
| Navigation |
| Message Index |