| Main > Main Forum |
| Happ Perfect 360's and power supply |
| (1/2) > >> |
| namedos:
I know you can daisy chain the grounds but does anyone know if you can daisy chain the +5V on the 360's? I was going to get the power from a Y-splitter on my molex connection from the PC power supply. My other option is to run a separate line for each joystick. Thanks. |
| Thenasty:
you can. Its still in parallel series so no voltage drop. |
| namedos:
Thanks Nasty, I just realized that it would probably be a heck of a lot easier to pull the power from the Optipac than it would from the PC power supply. Less running of wire and all self contained within the CP. |
| Taborious:
I was told that the Happ 360 could connect to a regular encoder, like the IPac4 and you didn't specifically need an optical encoder, that true? I am contemplating the 360's but still on the fence... |
| namedos:
It can be hooked up to the I-pac but it apparently is easier to hook up to the opti-pac. Since I've got one of those already going into my CP I figured I'd take the easiest way. Based on some other comments I'm trying to figure out what the Best way to go about this is. |
| Navigation |
| Message Index |
| Next page |