| Main > Main Forum |
| Konami Molex connectors? |
| (1/1) |
| moonpatrol 4 lyfe:
Does any one know which Molex connectors Konami used in their 4 player cabinets to interface players 1-4 with the internal circutry of the Cab? I have a G.I. Joe Machine (which I believe was a TMNT) that has one of these connections per player to allow the easy removal of the CP. Thanks, Bill |
| quarterback:
I have a Konami cab and may have asked a similar question (if you have the same 8pin-2row connectors I've got). Check out this thread. If they're the same connectors, then the cheapest solution is to buy some 4-pin molex power supply connectors (since they'll fit onto 4 of the 8 pins) or cut the wires and try something else. |
| moonpatrol 4 lyfe:
Bob Roberts has the 8 pin connectors, but I dont believe they're on his parts list. I have 15 pin molex connectors =(. Does anyone know any good 15 pin molex pins that I can use on my cab in place of the ones already there? Bill |
| ErikRuud:
Try http://www.mouser.com They have all kinds of Molex connectors. |
| Navigation |
| Message Index |