| Main > Monitor/Video Forum |
| how to clean a monitor |
| (1/3) > >> |
| muell67:
Ive got my monitor out of my cabinet while I laminate and paint. So I thought It would be a good time to clean up the monitor the electronics are all covered with a black film that cant be blown off. What is the best way to get this off without trying to simply rub it off. |
| Ken Layton:
Use an ordinary (and clean) 1" wide paint brush to knock all that dirt free then blow it off with an air compressor. Be careful around the convergence rings on the neck of the tube. There is where I use a half inch wide paint brush to knock the dirt loose. |
| muell67:
I thought I remember seeing somesort of spray solvent for cleaning electronics. I think it was at radioshack. I dont know what its called but would I be able to use something like that? |
| Thenasty:
hehehe, imagine if those dirt are the one holding your Monitor in working order :D |
| Ken Layton:
The cleaning spray you are probably thinking of is Radio Shaft # 64-4327 Precision Electronics Cleaner spray. It costs around $12 a can, but may be priced considerably higher in states with 'environmental' surcharges tacked on. |
| Navigation |
| Message Index |
| Next page |