Thanks, just checked your site out and that's a nice cab..quite similar actually. So why is it in pieces?
Make sure you throw some lighted buttons in there when you're re-assembling..could easily be as 'visually stunning' as mine, even more so.
Appreciate the complements on my cab, although it's not nearly as nice as yours, trust me.
There's tons of inperfections (the plexi over the CP isn't cut straight and actually has to stick over the top of the t-molding at one point, etc etc etc.
The reason why it's in pieces:
You were smart and you framed yours with 2x4's. Id idnt. I merely used 1x2 pieces of wood to attach the main panels to. Then, when I was moving, I added castors to the bottom. I was stupid enough to not reinforce the bottom panel the castors were bolted onto with more wood or metal.
I loaded the cabinet into the Uhaul, everything was fine.. When I got to the new place, I opened the truck, and saw the following:
The bottom panel shot up through the cabinet. This broke the shelf that held the hard drives and CD roms, adn they had flown out the back of the cabinet. The motherboard *MIGHT* have survivied. I haven't tested it quiet yet so I'm not sure. The entire right side of the cabinet split from the rest of the cabinet by about .5 inches. The entire right side is held on literally by ONE thread of the screws.
I also screwed many panels DIRECTLY together, and wood glued.. MOst of these separated.
It stands, but barely.. It has to be rebuilt and repainted.
I have no time to do this at the moment.
When I do rebuild it .. it will have:
A: lighted buttons.
B: MUCH better support.
C: New plexi.
D: Probably new smoked glass. I dunno where that panel went. I think I still have it but I'm not sure.
When will I get around to this?
Who knows
It's so depressing.
--NipsMG